Envision 480mC PVC-Free Wrap Film

SV480mC and LX480mC are high performance, 2-mil white, non-PVC films with a lustre finish and pressure-activated adhesive for easy sliding, tacking, snap up and repositioning. Both products offer a non-visible air release channels for fast and easy, bubble-free installations. Ideal for textured surfaces.

Dichroic Films for Architectural

Dichroic architectural iridescent films can be used in applications such as shading fins, balustrades, exterior glass, glass partition walls, shower door glass, artistic glass and glass furniture.

AG-4 AG-6 Anti-Graffiti Window Film

AG-4 and AG-6 films help provide a cost-effective barrier against damage, and can be removed and replaced quickly without the need to remove your windows

FerroSoft FF Magnetic Receptive

ASLAN FerroSoft FF 480 and FerroSoft Print PVC-free FF 550 are permanent self-adhesive, white faced, magnetic receptive films that transform any smooth surface into a magnetic board.

UltraTack Clear High Tack DFP 6

A 3.15mil, polymeric clear digital printing film with ultra-strong clear permanent adhesive for use on low surface energy surfaces. Printable with all inks, this versatile film can be also be overlaminated with itself. REACH compliant and phthalate free.

WindowClear DFP 18 Clear

WindowClear DFP 18 is and ultra-clear, 3.15mil, polymeric, high gloss PVC film with a semi-permanent adhesive that removes cleanly leaving no adhesive residue behind. Ideal for behind-glass applications. REACH compliant and phthalate free. Compatible with solvent, eco-solvent, latex and UV-curing inks

PrintMilky Dryapply DFL 210

ASLAN PrintMilky Dryapply DFL 210 is a 3.15mil (80 micron) printable, PVC self-adhesive glass decoration film with milk-glass effect that is ideal for creative effects on all glass surfaces.

Print N'Go Floor Graphic DFP 33

ASLAN Print'nGo DFP 33 is an 4.9mil self-adhesive, textured white digital printing film that is the ideal product for short-term indoor floor graphic applications for up to 6 months. This film is designed for for smooth interior floors and can withstand scrubbing and buffing machinery.

Illustra Glass Decor IL 350 Pattern

Illustra Snow IL 351, Linen IL 350 and Dot IL 352 are 3.15mil, air egress DRY APPLY polymeric glass decoration films with an appealing white snow design, white linen weave or white dot design for easy dry application. Printable with solvent, eco-solvent, latex and UV inks.

ASLAN MagneTack MT 400 PSA Magnet

ASLAN MT 400 MagneTack is a 15.7mil black magnetic face, with an aggressive, permanent self-adhesive backer and a coated paper release liner. This PSA magnetized base layer can help create interchangeable marketing messages. Combines with ASLAN FerroPaper FP 180 polyester and FP 260 polypropylene printable ferromagnetic films which will mount to the surface of the magnet allowing for easily changed messages and marketing.

ASLAN FerroPaper Magnetic Receptive

ASLAN FP 180 PET (7mil) and FP 260 PP (11mil) are are matte, white printable face films with a ferromagnetic back that combines with MT 400 MagneTack to create an indoor, interchangeable messaging and marketing system. Compatible with solvent, eco-solvent, latex & UV-cure inks. PVC-free.

PrintMetal CA 30 Metallic

PrintMetal CA 30 is a 5.5mil, metallized PET film with a permanent adhesive that is digitally printable. Suited both for doming applications and also roll or flatbed plotting and for printing with solvent, eco-solvent, latex and UV-curing inks.

MPI 3901 PVC-Free Removable Film

MPI 3901 is a 2.6mil (65 micron) PVC Free, semi-gloss, polyolefin face film with a clear, removable adhesive on a clay-coated paper liner. Compatible with Latex & UV cure inks only. 1year outdoor durability.

SPF 1000 Protection Films

This film is premium quality, ultra-conformable, aliphatic polyurethane 8mil film with an adhesive system designed for new generation of automotive clear-coats and other typical OEM surface finishes.

Dimense Print Media

Dimense print media is an enviromentally friendly, nonwoven wallcovering material that is made specifically for use on the Dimensor S printer.

FloorTac Textures Print & Go Floor

FloorTac Textures is a print and go, 6mil thick, matte white, pebble textured polymeric vinyl with a double-thick removable grey adhesive. No lamination required.

FloorTac Floor Graphic Film

A 4mil, long-term removable, matte, self-adhesive printable PVC film to be used as the base layer for floor graphics including carpet, tiles and much more. Fire rating CAN/ULC-S102 certified. To be compbined with InterLam Pro Emerytex no-slip laminate.

Interlam Pro Anti Graffiti Laminate

Interlam Pro Anti-Graffiti UV is a 2mil, high performance PCTFE barrier film with very strong anti-graffiti and dry erase characteristics. Long-term indoor and 7 year outdoor durable.

Wipe Erase Dry Erase Laminate

Wipe Erase (Previously WipeOut) Premium Dry Erase 2 mil clear laminate is easy to write on and to wipe off. The chemical and scratch-resistant UV hardcoat, clear gloss surface and anti-graffiti qualities safeguard against ghosting or staining from ink.

Protac Scribe Dry Erase Laminate

Protac Scribe is a 2.5 mil pressure-sensitive gloss film with a specially treated surface making it appropriate for dry-erase applications. FDA approved for direct food contact: FDA Certification 21 CFR 177.1520 21 / CFR 178.2010 21 / CFR 178.3130.

Polar Chrome Silver PET Film

Polar Chrome SEL is 3mil printable, satin-silver polyester film with a clear permanent acrylic adhesive. Compatible with Solvent, Eco-Solvent, latex and UV-cure inks.

ArmourPrint Emerytex & ArmourGrab

A 23mil total thickness, two-part, reverse-printed PVC based material set with a rubberized backer for the creation of counter mats, mousepads, coasters and more.

Polar Street FX Aluminum Floor

A 10mil thick, PVC-free, aluminum core, slip-rated, textured print and go floor graphic with a permanent adhesive for exterior use. Ideal for use on rough ground surfaces such as brick, concrete, asphalt, or other low surface energy substrates. Compatible with solvent, latex and UV-cure ink.

ChalkMate Blackboard Film

5 mil durable PVC film with black chalkboard finish.

SpotOn Floor 200 No Slip Removable

SpotOn Floor 200 is an 8mil print and go material for short-term, indoor floor graphics without the need for lamination. Simple, easy installation. R10 slip rated and B1 fire rated, it can also be cleanly and quickly removed within six months of application. Fire rated CAN/ULC-S102

LexEdge FR-65 10mil Polycarbonate

LexEdge FR-65 is a 15" Gerber Edge printable or 48" Wide Format UV-cure or Latex printable custom-formulated, 10-mil clear LEXAN-based polycarbonate. UL94 V-0 rated, flame-retardant with a velvet finish on one side and a matte finish on the other. It is thermo/hydro-formable, embossable, foldable and can be die cut. Applications include aviation, transportation, printed circuit board, electronics, high-heat, and instrument panels.

Rigid White PVC 10mil, Shelf & Tag

A white, 10 mil semi-rigid PVC material. Ideal for non pressure-sensitive applications. Life of 1 year when installed vertically. Available in 15" width for Gerber Edge and 48" wide format width for latex & UV cure printing.

LexEdge II Polycarbonate 5 or 10mil

Semi-rigid, 5mil or 10 mil Lexan ideally suited for the production of exhibits, displays, signs, and all types of sub-surface graphics. Available in 15" for Gerber Edge and 48" for wide format printing.

GlowBrite Photoluminescent Film

GloBrite #7615 is a 9mil, PVC based photoluminescent printable film with a removable adhesive. With the release liner this material is 15mil thick. This material will glow for up to 2 hours and recharges again within 10-15 minutes. Compatible with solvent, latex and UV inks.

Matador Floor & Counter Mat System

Jessup Matador is a 2-part, thick, PVC based mat system ideal for both counter top and floor mats. The system is made up of a 40mil reverse-printed, clear PVC base (available in either fine or coarse texture), which is then laminated to a 20mil thick textured, slip resistant backer. Total thickness is 60mil.

Clearwalk Textured Floor Graphic

ClearWalk is an 18mil thick, clear, textured translucent floor graphic material that blends with the surrounding surface creating unique and dynamic visual effects. No lamination required - print and go!

TexWalk Textured Wall and Floor

TexWalk is an 14mil white, textured, matte vinyl with fabric backing and repositionable, solvent acrylic adhesive. It works great on carpet, tile, wood, metal & painted surfaces and is ideal for tradeshow and POP graphics. No lamination is required - just print and go! Compatible with solvent, eco-solvent and UV inks and also certified for HP latex platforms.

Jessup 23ml Textured Floor Laminate

Jessup's heavy duty, clear textured overlaminate is a 23 mil embossed, anti-slip PVC laminate able to withstand heavy foot traffic. It adds to the durability to indoor floor graphics for up to 12 months durability.

Asphalt Art Outdoor Floor Graphic

Ashphalt Art is a patented, 23mil thick, aluminum foil based material with a double-thick adhesive layer for short to long-term application onto asphalt, concrete, stairs, stone, brick, around pools and other walking and driving surfaces. Compatible with UV-cure and latex ink.

SportWalk Textured Outdoor Floor

Slip-resistant, textured surface, with waterproof adhesive, designed for short-term outdoor advertising and events.

CatWalk Textured Floor Graphic

A 20mil, opaque white textured PVC print and go floor graphic with a long term removable adhesive. It is extremely slip-resistant surface even when wet. No-slip certified ASTM - D2047.

MetaGuard MG-F FloorArt Laminate

MG-F FloorArt is a 4mil thick, monomeric, textured, anti-slip over laminate on a lay-flat paper liner, for use in the production of indoor promotional and short term floor graphics. Universally compatible with any calendared face film for floor graphic use. Compatible for use over solvent, eco-solvent and latex prints

PolyBrite Non-Adhesive Clear Film

5.5mil glass-clear PET film with a high gloss surface and an anti-static backing.