12 Volt LED Power Supplies

LED Power Supply 12V DC 60WATT 120V

LED Power Supply 24 Volt

Allanson 24 Volts power supplies are DC systems available in 72W and 96W/

Wet Location LED Power Supply

Wet location LED power supplies in CVW125-MV or CVW243-MV

Skyline Rigid LED Border Tubing

Allanson's LED SkyLine Rigid Border Tubing is available in six standard LED colors with balanced even illumination and no dead spots. Custom coloured Skylock can also be ordered.

LEDgen LED Modules

LEDgen LED Modules are available in 0.5W (S05W2CW) and 1W (S1W2CW). The 0.5Watt offers 100 lumens per foot and the the 1Watt offers 200 lumen per foot.

Skyline Rigid LED Border Tubing Kit

Allanson's LED SkyLine Rigid Border Tubing provides top of the line LED systems that complement and enhance the appearance of your building. With superior accent lighting, the sky's the limit!

LEDgen2 LED Modules White & Colours

Allanson LEDgen2 12V LED modules are available in white, red, orange, green and blue in either 0.5W, 0.75W or 1W combinations. They feature a 160° beam angle which provides balanced and uniform illumination and consistent colour.

LEDgen2 BLP Low Profile Modules

LEDgen2 Bat Wing Low Profile white module have a colour temperature of 3000K or 6500K for 1.5" to 4" deep boxes.

SPEEDLamp 120-277V T12 LED LAMP

SPEEDLamps LED T12 lamps offers a unique and robust construction. Offering a built-in, Class-1, high power factor driver, this IP 65 rated fluorescent lamp replacement is rotatable with sealed end caps and 50,000 hours of lifetime.

LEDGEN2 12V Micro Mini Module

Micro Mini 12 volt modules are designed to fit into channel letters and light boxes from 1" to 3" deep! Light is evenly distributed with a unique oval optic lens that creates a beam angle of 170 degrees x 130 degrees. IP67 rated.

Economy 7000K LED Modules

12V Economy modules are 7000K, and are rated for lightbox and channel letter use. These have a 160 degree beam angle.

LEDGEN2 12V Mini LED Module

Mini LEDGEN2 LED modules are designed to fit 1/2" narrow stroke and 1.5" shallow depth sign boxes or channel letters.

StormTight II, H/O 1 Watt Module

Allanson's High Output ACLW-CW-1W 1-watt module provides you with a unique LED lighting alternative for sign boxes and channel letters.

StormTight II, Wh Channel Series

LED modules for returns of 2" to 6" and now brighter, whiter and more efficient!

LED Slide II

Allanson's New LED Slide II can be spaced 12" centers just like fluorescent lamps while providing the same even illumination on the sign face. One extruded aluminum track holds modules for single or double sided sign applications. LED Slide II is the ideal solution for LED backlighting of large channel letters and cabinet signs.

LEDrofit

LED retrofit solutions for replacement of fluorescent lamps.

StormTight II ACLW-CW2-LP

StormTight II ACLW-CW2-LP Low Profile LED Modules

StormTight LED 3 Watt

Allanson's powerful StormTight ACLW-CW-3W 3-Watt bar module can be spaced in rows at 12" and on an extruded aluminum rail which saves on installation costs. The rail also allows for the illumination of double sided signs by mounting the 3 watt modules back to back.

RBG/DMX System

Allanson's RGB System merges superior LED technology with advanced DMX controllers that allow you to create multiple colour variations and customized program sequencing.

LED Saber

Allanson's LED Saber perimeter lighting provides bright, uniform illumination over the sign face. Using less than half the material, labour and power than conventional fluorescent lighting, the LED Saber mounts easily into the perimeter of sign cabinets.

Very Low Profile Module

Very low profile module, very wide beam for shallow applications.

LED Saber2

The LED Saber2 is designed for farther light projection and provides greater surface area coverage with maximum brightness and uniform light distribution for optimal results.

Alumet Aluminum Composite Panel

Alumet aluminum composite material (ACM) panels are composed of a thermoplastic core of low density polyethylene, bonded to two sheets of aluminum. The painted surface is protected with a strippable mask to prevent scratching and fingerprints.

Alumet Aluminum Channel Coil

Aluminum channel coil is a prepainted aluminum in 3.5", 4.3" or 5.3" wide that is wound into a coil. For use in creating channel letters. Also referred to as an aluminum return.

Bitro Lattice

Bitro's CSA certified Lattice is a LED matrix lighting systems for cabinets and large backlit boxes.

Bumblebee Series

Bitro Bumblebee LED Modules offer industry accepted features at economy prices. 8000K pure white, wire to wire technology and IP67 rating allows for 84 modules per 60W power supply.

Bitro LED Diode Modules

Bitro's CSA certified eco:PRIME LED channel letter module series brings together an eco-conscious lighting package to the market. Eco:conscious, eco:ficient, and eco:nomics.

Bitro DuLite Acrylic Panel

Bitro's DuLite is a line of colour changing acrylic panel product based on revolutionary patented colour changing acrylic technology.

Tetra MiniMAX

Tetra MiniMAX is the LED solution that is perfect for small channel letters.

GE Power Supply

GE 12V and 24V Tetra Power Supplies include options for jobs of any size.

Tetra PowerMax

Tetra PowerMAX is the 24V LED module system designed for large channel letters as shallow as 4 inches in depth. It delivers uniform light and installs easily and operates efficiently.

Tetra PowerStrip

GE Tetra PowerStrip 24V LED lighting solution delivers 30-35% more lumens than the standard Tetra system. OptiLens technology spreads, bright, uniform light evenly across the sign face, eliminating traditional fluorescent hotspots and striping.

Tetra EdgeStrip

Tetra EdgeStrip 24V modules are engineered to install easily around the edge of cabinet signs with a 3 to 6 inch can depth.

Tetra Max

Tetra MAX is the 24V LED system for medium size channel letters as shallow as 4" deep.

Tetra MS

Tetra MS (Micro System) is the 24V LED lighting solution for channel letters as shallow as 1.5 inches (38 mm) deep and as narrow as 0.5 inches (13 mm) wide.

T12 Daylight LED Lamps

GE NB2000 are economical T12 sized LED retrofit light bars for cabinet signs. NB2000 is designed to retrofit into existing LFL cabinet signs to replace conventional fluorescent tubes with modern LED technology.

Tetra Contour

Tetra Contour combines a flexible LED light engine with a bendable rigid, optically diffuse extruded-plastic light guide that can be heated and formed to fit a wide variety of designs and applications.

Vivid S LED Flex Tubing

Vivid Flexible Neon LED tube lighting in a variety of colours and sizes with coloured jackets.

AVAILABLE

USLED TDX LED Modules

USLED TDX Modules and TDX Retrofit Kits can be mounted 3" from the sign fascia, have 8" spacing between rows and provide even light diffusion. This means that one product can be utilized in 3" depth channel letters; or used in 18" deep sign cabinets.

Saver3 Channel Letter Module

Saver3 is the perfect choice for those applications that need great light on a competitive budget.

Tadpole 3 Channel Letter Module

Tadpole solves the problems of installing LED modules into narrow strokes and brightening small channel letters. With modules available in red, orange, green and blue, and white. Tadpole is one of the industry's smallest footprint, high brightness modules, fitting easily into strokes as narrow as 0.5".

TD3 Module

USLED TD3 offers the same light consistency at an 18" depth as it does at a 3" depth, while also offering options for a 12V power supply and a 24V power supply.

PosterBrite 4mm 2' Module

Providing bright, even light at 550 lumens per foot, PosterBrite is ideal for use in advertising graphics.

Advance Power Supply

Philips Advance Electronic LED power supplies offer a range of products specially designed to operate LED solutions for a variety of lighting applications.

Quick Connect Jumper Wire Pair

USLED's Quick Connect Jumper Wires will make installation a snap! Simply connect the jumper wires from one module to another and you're finished.

Right Light Series

Coloured modules are great for use in channel letter applications with depths ranging from 2" and up, this series is available in 2-up or 3-up modules and they are available in all colours.

CP360

Sign Box Modules which produce an evenly distributed light, making them the perfect solution for single and double faced sign cabinets.

TD3 Retrofit Kit

USLED TD3 kit is a single or double sided LED retrofit kit of LED modules mounted to a 4' aluminum extrusion. Kit comes complete with installation hardware.

TD1 Module

The TD1 is a unique solution providing superior brightness and uniformity in both shallow and deep signage applications. The TD1 has a minimal size combined with massive lumen output and light distribution, making it the optimal solution across multiple applications.

USLED Power Supply Enclosure Box

Power Supply Life Extender Box (PS-1-BOX) is formed of corrosion protected steel and includes a heat sink for the power supply. Box measures 3.25" W x 12.02" L X 1.78" D.

PDX LED Modules

PDX1 12 volt LED modules illuminates the face of a sign with a stroke as wide as 12 inches in a 5 inch deep can using only 2 modules per foot.

LinearStar Outdoor LED Fixture

LinearStar is a 24V linear outdoor LED fixture perfect for front sign lighting or wall washing applications.

TDXL

TDXL is the future of cabinet lighting solutions. O?ering an even light consistency in 3" to 18" depth cabinets and rated to IP66, the TDXL is one of the most versatile units on the market.

Point XL

PointXL is a 12volt LED module that is ideal for narrow row spacing in channel letters. With dimensions of 2" x 0.75" x 0.48" and an IP rating of IP67, it accelerates sign lighting with a top performing high quality, low cost module.

Saver XL

SaverXL is a mini-sized 12volt module that accelerates channel letter lighting with unmatched versatility. Suitable for wet locations (IP67 rated) and class 2 compliant, this module measures only 0.9" x 0.55" x 0.42".

EESB Fluorescent Ballasts

These EESB electronic ballasts are up to 25-35% more efficient and do not generate excessive heat compared to magnetic ballasts. Each ballast will now operate a wider range of lamp footage and input voltages.

RSS Electronic Ballast

RSS series electronic sign ballasts are the direct replacemnt solution for ferromagnetic ballasts with no rewiring needed. For use with the T8 and T12 HO lamps 2' to 10' in length.

Voltarc T12 TUFStraight Lamps

TUFStraight fluorescent sign lamps are well suited for use in the commercial display sign markets for indoor and outdoor applications up to -20C. Rated from 9,000 - 12,000 hours of life and compatible with magnetic and electronic ballasts for sign cabinets 6" and over.

Voltarc T8 TriLight Lamps

T8 TriLight series of fluorescent sign lamps offers exceptional colour rendering for maximum lumen output and maintenance performance for all lamp applications. Rated for 18,000 hours of life for sign cabinets 4" and under.

Voltarc T12 TriLightMAX Lamps

TriLightMAX T12 series fluorescent sign lamps offer exceptional colour rendering for maximum lumen output and maintenance performance for all lamp applications with 50,000 hours of life for sign cabinets 6" and over.

Voltarc T8 TriLightMAX Lamps

TriLightMAX T8 and TriLightMAX T8 Thermal fluorescent sign lamps offer exceptional colour rendering for maximum lumen output and maintenance performance for all lamp applications with 80,000 hours of life for sign cabinets 4" and under. The T8 thermal lamps are specifically made for low temperature operation.

Uni-Serve

Allanson 120V self adjusting neon transformers are available in standard and Unitran enclosed cases

POW-R-PAK

The first high-frequency, solid state neon power supply for outdoor and indoor use.

Aluma-Pak Outdoor

Packed in metal to work on metal, Aluma-Pak™, in its extruded aluminum case with solid fill, provides for maximum water resistance.

Panagraphics III

3M Panagraphics III is a 19-22mil translucent awning and backlit material with a smooth front surface and a semi-gloss finish.

Alumet Aluminum Composite Panel

Alumet aluminum composite material (ACM) panels are composed of a thermoplastic core of low density polyethylene, bonded to two sheets of aluminum. The painted surface is protected with a strippable mask to prevent scratching and fingerprints.

Alumet Aluminum Channel Coil

Aluminum channel coil is a prepainted aluminum in 3.5", 4.3" or 5.3" wide that is wound into a coil. For use in creating channel letters. Also referred to as an aluminum return.

CooleyBrite 20oz Digital Print

Cooley's digitally printable original white backlit sign and awning material, Cooley-Brite 20 oz is a flex-face, gloss material that comes with an eight-year warranty.

Cooley-Brite 20oz Eradicable Colour

Cooley's original eradicable backlit sign and awning material, Cooley-Brite 20 ounce comes with an eight-year warranty. Compatible with Cooley Magic eradication fluid. This product is not digitally printable.

Cooley-Brite Lite 16oz

This eight-year warrant, 16 oz eradicable substrate, is based on the same proven technology as Cooley-Brite. Cooley-Brite Lite is lighter in weight, offering unique flexibility for ease of installation. As with Cooley-Brite, it is translucent, flexible, durable and features excellent lay-flat characteristics and is engineered for high colour brilliance and consistent colour transpareny.

Cooley Magic

Cooley Magic is an eradicating solution for removing colour coating on Cooley-Brite awning fabric.

Cooley Coolmask

Coolmask is a durable, scuff-resistant, flexible, white calendered vinyl film that can be used with a premask. Ideal for decoration application, including eradication, spray painting, pressure sensitive, heat transfer, and screen printing.

Gloss

Conventional, UV-inhibited acrylic polyurethane for extreme performance of colour and gloss retention.

Ultra Low VOC Satin Colour

MAP-LV (Matthews Acrylic Polyurethane Ultra Low VOC) is designed to meet the most stringent VOC regulations while retaining the colour range of their conventional product.

Catalysts

Second part of the two component system necessary for the crosslinking of paint resin to reach a cured state.

Gloss Metallic

Gloss Colours are Mixed with any of Four Metallic Toners to Create Metallic Appearance and Texture.

Low VOC Satin Colour

Increased durability. Low VOC makes it more environmentally friendly.

Satin

Produces smooth, uniform satin colour and finish that is chemically-resistant, and offers long-term durability.

Clears

Used as topcoat application to protect colour-coated signage. Also highlights architectural metals.

Satin Metallic

Satin Metallics For a Smooth, Satin-Like and Subtly Metalic Finish.

Factory Pack Colours

These colours require the use of a clear coat for exterior applications

Pearls

Similar to metallics, but instead of metal particles these paints use pearl mica. Effect is semi-transparent, absorbs/reflects light.

Primers (Related Primers)

Primers & Adhesion Promoters specific to multiple substrates such as woods, plastics and some metals for increased adhesion.

Primers (Wash Primers)

Specific Acid Etching Primer for Metal Surfaces Such as Aluminum.

Reducers

Thins paint so it's sprayable, and flows evenly. It keeps the resin in a liquid state for transfer to gun, then to substrate.

Acrylic Matting Clear

For flattening MAP colours to a lower gloss.

Suede Additive

White powder that produces a textured finish in either MAP or VOC MAP colours/clears. Texture resembles suede appearance.

Low VOC Base Coat Converter

Basecoat Converter enables Matthews Conventional satin, gloss and SVOC 2K products to be converted into a basecoat / clearcoat system, minimizing your need for an additional bank of toners.

Accelerators

Designed to increase cure and tape of urethane paints. Ideal for use in cool temps or quicker vinyl application and packaging times.

Brushing/Rolling Additive

Allows Matthews colours or clears to be able to brush or roll.

Flattening Paste

For reducing gloss levels of VOC MAP HS colours, clears. No increase in VOC's.

Flex Additive

Used in Matthews topcoats to give flexibility on pliable surface. Prevents cracking if substrate flexed, impacted.

3630 Translucent Film

2 mil graphic film for internally-illuminated sign faces. For permanent, interior and exterior graphics. Clear, pressure-sensitive adhesive and water-resistant liner.

3632GPS Translucent Film

Cast vinyl graphic film with clear, permanent, pressure-sensitive adhesive. Thermoformable, Long-term durability, Interior and exterior.

3635 Series Light Control Film

3635 light control films are a series of Day/Night, Blockout, Light Diffuer, and Dual Colour films for controlling, enhancing and blocking light in backlit light boxes.

3M Custom Translucent Colours

3630, 3632, 3635 custom or corporate translucent colours.

UC 900 T

High performance 2 mil cast films maintain consistent colour under both transmitted and reflected lighting conditions and adhere to a wide variety of substrates. 9-year durability.

230

3 mil cast vinyl for internally-illuminated signs. Uniform colour and surface finish eliminate glare. 3-5-year exterior life.

Metamark 600T Translucent Film

Metamark 600T is a 3.14mil translucent, calendered 7-year vinyl with light transmission for backlit signage in a wide variety of colours.

Adhesive Sealants 550 / 730 / 760

3M 550 Polyurethane (grey, white or black), 730 Low VOC (clear) and 760 Low VOC (white) adhesive sealants are formulated to have a wide variety of hardness, open times, and performance parameters to meet many application needs.

4026

4026 is a 62mil thick, natural coloured, double-coated, open-cell urethane foam tape with a paper liner. It is durable on interior mounting applications with a high shear strength.

4032

4032 is a 1/32" thick double coated urethane foam tape which is conformable and offers high shear strength.

4462

4462 is 1/32" black double coated polyethylene foam tape. Quick stick adhesive is ideal for bonds to a variety of surfaces for light duty applications for industrial and electronic use.

4492

3M 4492 is a 0.031in (0.8mm), white or black, double coated closed cell polyethylene foam tape on a tan paper liner. It is conformable with quick stick acrylic adhesive that bonds well to irregular surfaces. Bonds to a variety of surfaces for light duty applications.

4611

4611 is a 45mil, grey, firm double sided closed cell acrylic foam tape with a red PE liner. This tape has excellent temperature resistance and can be used to bond metal parts prior to paint processing.

4910 Clear for Acrylic & Glass

4910 is a 40 mil, crystal clear, closed-cell acrylic VHB tape with red PE film liner and permanent acrylic adhesive. Used for joining clear or light coloured materials and can be used to replace rivets, screws or fasteners.

4930

4930 is a 25 mil, thick, white, closed-cell acrylic foam carrier with printed paper liner and acrylic adhesive. High strength, convenient handling, damp- and impact-resistant.

4936

3M 4936 VHB tape is 25 mil grey closed-cell acrylic foam tape. It is conformable, provides good adhesion to many painted metals and is plasticizer resistant.

4941

4941 is a 45mil, grey, conformable, double-sided closed-cell acrylic VHB foam tape with paper liner. Bonds to a broad range of high and medium surface energy substrates including metals, glass, and a wide variety of plastics.

4945

4945 is a 45mil, white acrylic VHB foam tape with a multi-purpose acrylic adhesive on a kraft paper liner. Bonds vinyl trim and prepainted signs onto trucks and trailers.

4950 Foam Tape

4950 is a 45 mil, white closed-cell acrylic foam VHB tape featuring an all-purpose acrylic adhesive. Good for high surface energy substrates.

4951 Foam Tape

4951 is a 45mil, double-sided, closed-cell VHB acrylic foam tape with PET film liner for low temperature installations. The high tack acrylic adhesive can make a reliable bond at 32F (0C). Bond panels to aluminum building frames and truck trailer frames.

4959

4959 is a 120mil thick, firm, white, double-sided VHB closed-cell acrylic foam tape. Bonds well to high surface energy substrates. Provides handling convenience, cushioning, damping, and impact resistance.

5952 for Powder Coat

5952 is a 45mil, highly conformable, black, double-sided closed-cell acrylic VHB foam tape. For tough to stick to surfaces such as powder coated paint and plastics. Bonds well to high and medium surface energy substrates.

4466

4466 is a 62mil light duty, double-coated white polyethylene foam tape, that is conformable, with rubber adhesive for variety of surfaces.

4658F

3M 4658F Removable Foam Tape is a clear, double coated acrylic foam tape that removes cleanly from many surfaces. Ideal for mounting signs, air fresheners, nameplates or dispensers.

RP16 & RP45 Double Sided VHB Tapes

RP16 and RP45F VHB are your go-to conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tapes for bonding and mounting to a wide variety of substrates.

CV45F Commercial Vehicle Tape

Commercial Vehicle Tape CV45F bonds to a wide variety of high and medium surface energy substrates and is plasticizer resistant.

Structural Adhesive DP810 / DP81

3M Structural adhesives offered in DP810, DP810NS and DP812 versions are applicable for sign applications that require bonding, gluing, adhering, joining, attaching, assembling, encapsulating, potting and sealing.

3M IDC Electrical Connectors

Scotchlok insulation displacement connector (IDC) are easy to use and can save time during installation. Just Insert the wires and squeeze to close - no stripping or twisting required.

Alumet Aluminum Channel Coil

Aluminum channel coil is a prepainted aluminum in 3.5", 4.3" or 5.3" wide that is wound into a coil. For use in creating channel letters. Also referred to as an aluminum return.

LED Snap Frames

LED illuminated lightweight satin anodized aluminum snap frame, designed for indoor use.

Aluminum Snap Frames

Aluminum poster snap frames with anti-glare protective oversheet, designed for indoor use.

Kulka Tombstone Sockets

Tombstone style, snap-in, recessed double contact sockets for 800 and 1500mA lamps. With vertical contacts and 9" lead wires,for mounting on 0.36" to 0.48" panel. These sockets are available in both spring and stationary models.

Kulka Button Sockets

Button style, snap-In, dead front design, recessed double contact sockets for 800 and 1500mA lamps. With vertical contacts and 9" lead wires,for mounting on 0.36" to 0.48" panel. These sockets are available in both spring and stationary models.

Socket sentry fluoro lamp shield

Socket Sentry fluoro lamp shield with 582 black silicone cap.

Jewelite

Jewelite Trim Cap is a plastic moulding that adds new dimension to cut-out letters, it form fits to any style letter, Gothic, Roman or Script, etc. Adheres to plastic and other surfaces, no painting or polishing necessary.

WAGZIP Handle Magnets

Handled magnets that are used in shops for holding Jewelite Trim in place during assembly.

Jewelite "Nicker"

Letter trim like a pro with the "Nicker". The specially designed blade and anvil allows a stronger, more dependable cut which can increase the amount of work your shop currently performs with a knife and file.

TC15TOW-LED

Galvanized steel power supply can that is specifically designed to house LED power supplies. Listed for wet/damp/dry locations. Dimensions: 14.9" x 5.3" x 3.2"

Toggle Switch

WESTRIM Sign box toggle switch, 20 Amp