Gerber Vinyl Weeding Tweezers

Gerber Weeding Tweezers are metal, fine point Boley style tweezers perfect for weeding vinyl graphics or any detail work. Measures 4-3/4" in long. Polished tips are ground to match.

Traditional Gold Single Flute Bits

These bits are ideal for cutting sheet aluminum and brass with a thickness of 1.5mm and less, as well as soft woods and soft alloy aluminum. Unlike the spiral flute bits, these bits have a single straight edge which doesn't pull up on the work piece. This straight flute allows the bit to "shear" the cip off at the top edge of the material being cut without leaving a burr.

Traditional Gold 2 Flute Spiral Bit

Gold 2 Flute Spiral Router Bit.

Traditional Gold 3 Flute Spiral Bit

Gerber Gold routing bits are designed for greater performance and longer tool life. Made from the highest quality micrograin carbide to the tightest tolerances in the industry.

All Purpose Straight Bit

All purpose straight bits cut substrates with thin laminates such as foam boards, clay coated paper & styrene surfaces

Hard, Soft Plastic & Foam Bits

New Gerber Gold bits take the guesswork out of chosing the correct bit for a specific substrate by grouping them by application. The application is coded and etched into the shank of the bit, along with the part number for easy identification once the bit has been removed from it's sleeve.

Platinum Bit

These high performance bits can be used with all Gerber routers and engravers, as well as with other routers, both automated and manual. Made from high-quality sub-micrograin carbide, these bits are fashioned using a unique geometry. This reduces the need to change tools when routing a variety of materials requiring the same tool diameter.

Aluminum & Wood Router Bit

High-quality carbide bits ideal for Aluminum Composites, Hardwood, Softwood, Non-Ferrous Metals (Aluminum, Brass, Copper)

Folding Tool Bit

These high performance bits can be used with all Gerber routers and engravers, as well as with other routers, both automated and manual. Made from high-quality sub-micrograin carbide, these bits are fashioned using a unique geometry. This reduces the need to change tools when routing a variety of materials requiring the same tool diameter.

ADA Compliance Bits

Routher bits for ADA-complant signs. Shank diameter of 6.0mm/1/4". Long and Short Types use different engraver options.

3D Carving Bits

V-cutting carbide bits give superb cut quality, longest tool life, accuracy. For small, intricate graphics.

Router & Engraving Bits

Long and short engraving bits that work with Gerber Sabre and other routers and engravers. These bits are ideal for use with acrylic, polycarbonate and other plastics.

3D Modeling Bits

Gerber Gold routing bits are designed for greater performance and longer tool life. These remarkable routing bits are made from the highest quality micrograin carbide to the tightest tolerances in the industry. They are then coated with titanium nitride to enhance their durability even further. The result is superior edge quality and lower tooling cost.

Table Surfacing Bits

Used with a router motor or high frequency spindle, its purpose is to mill the sacrificial table surface perfectly flat in respect to the Z axis and aid in precise depth control when cutting. Available in either 1/2" or 1/4" shank diameter.

Gerber Router Collets

Gerber router collets are chucks that form a collar around the bit to be held. It exerts a strong clamping force when it is tightened.

CAT/Solara UV Printer Supplies

Cleaning and Maintenance Supplies for Gerber UV Printers.

GS, HS, Sprint Blades and Supplies

An Assortment of Supplies for Gerber Plotters.

Gerber Plotting Pens & Accessories

Plotter pens and pen assemblies

Embosstrack Supplies

Knife holders and Blades for EmbossTrack plotters.

Fastrack Supplies

The cutting strip is the plastic strip directly under the where the blade cuts the media.

EnVision Supplies

Blades and Pens for EnVision plotters