LED Snap Frames

LED illuminated lightweight satin anodized aluminum snap frame, designed for indoor use.

Boulevard Pole Banner Kit

Super strong 1.66"inch x 6' poles to create pole banner systems. Kits contain 2 pole brackets, 2 aluminum poles, 4 stainless steel straps and 2 cable ties.

Aluminum Snap Frames

Aluminum poster snap frames with anti-glare protective oversheet, designed for indoor use.

Sign Feet

The original patented standoff made for A-frame signs. Keep the sign off moisture, and using the anti-spread rope, prevent the sign from falling flat, or doing the splits.

Grommets, Dies & Punch

Grommets, Grommet Dies and Grommet Punches of various sizes ranging from #1 to #4. Both top and bottoms of the grommet are included in the box. Grommets are brass unless otherwise stated.

SignaBracket

SignAbracket is designed to hold corrugated plastic signs. SignAbracket can be secured to just about any support surface using a range of fixing methods and installs in minutes. SignAbracket can hold all thicknesses of corrugated plastic between 3mm and 6mm.

Hinge Handles

Metal or Plastic Hinge Handles to create quick A-Frames from MDO, PVC or ACM.

Metal A Frame, Top Loading

24"x18", 32"x24" or 24"x36" Top Loading Metal A Frame for indoor/outdoor use.

Spider Feet

Use with foamboard, Coroplast or PVC to create instant stand up signs.

Stainless Steel Stand-Offs

Stainless steel, hollow fill stand-offs allow you to hang your rigid signs away from the wall.

Metal A Frame, Side Loading

These metal side loading A frames are black, powder coated metal, that can be used both indoors and outdoors. Simply insert the graphic panel into the side slot of the sign and set into place. Insert sizes rage from 24Wx36" to 32Wx48H.

Galvanized Metal U-Channel Post

U-Channel metal galvanized posts are simple and durable for mounting standard traffic signs. When choosing a post length it is important to remember that 24" to 36" of your post will normally be underground. Holes are drilled 3/8" diameter and are spaced 1" center.

Windspinner

18"x30" double-sided spinning sign attracts attention, fits standard Coroplast.

Floor Stand Chrome

A 22"x28"x60" double-sided, top loading floor stand for coroplast, foamboard or ACM inserts. Can be used both single or double sided depending on the inserted print.

Metal "A" Sandwich Board

This white metal A sandwich board is comprised of two fixed, solid metal faces, mounted onto an A-Frame style stand. Each white metal face is 24" W x 34 3/4" H.

Spider Stepstake

A black plastic spider step stake that is 8" wide x 26" high with 5" long prongs that the corrugated plastic mounts on to. Made for use with 4mm corrugated plastic. 50/box.

Galvanised Delineator Post

An 8-foot long, u-channel shaped galvanized steel post with 24 pre-drilled holes. Used for light-duty sign display and for reflectors along the side of a road.

Crane Sign Holder

A metal crane style real estate sign holder comprised of two black, powder coated metal parts that mount on top of one another. Sign size is 24" wide (up to 40"). This sign holder can also be used to display double sided prints.

Two Post Frame

Metal Real Estate two post frame, comprised of two powder coated, black metal pieces that mount on top of one another. These are top loading sign frames that hold 4mm Coroplast inserts. Insert area size is 24H x 32W. Total height is either 48" or 60" depending on style chosen.

Sign Link Fence Mounting Brackets

Sign Link brackets are the perfect solution for installing signs to chain-link fencing and channel sign posts. Each piece is molded from glass filled nylon. Sign Link brackets installs to any fence grid size and are pre-threaded and ready to use.

Stepstake

Step Stakes are 30"x10" H-Frames for 4mm corrugated signs.

Dura X-Banner Banner Stand

An economical 23.5" wide and 63 to 71" tall, light weight and portable banner stand that is easy to setup and pack. X-banner stand frame looks like the letter X.

ASB 7" - 11"

7" - 11" Wide Aluminum sign blanks, available in a variety of gauges

ASB 4" - 6"

4" - 6" Wide Aluminum sign blanks, available in a variety of gauges

ASB 12"

12" Wide Aluminum sign blanks, available in a variety of gauges

ASB 13" - 17"

13" - 17" Wide Aluminum sign blanks, available in a variety of gauges

ASB 18"

18" Wide Aluminum sign blanks, available in a variety of gauges

ASB 19" - 23"

19" - 23" Wide Aluminum sign blanks, available in a variety of gauges

ASB 24"

24" Wide Aluminum sign blanks, available in a variety of gauges

ASB 25" - 35"

25" - 35" Wide Aluminum sign blanks, available in a variety of gauges

ASB 36"

36" Wide Aluminum sign blanks, available in a variety of gauges

ASB 37" +

+37" Wide Aluminum sign blanks, available in a variety of gauges

French Language Signs

Pre printed French language aluminum signs

No Parking Signs

Pre printed "No Parking" aluminum signs

Private Property Signs

Pre printed "Private Property" aluminum signs

Reserved Parking Signs

Pre printed "Reserved Parking" aluminum signs

Stop Signs

Pre printed "Stop" aluminum signs

Wet Edge Squeegee

Hard card squeegee with a special wet edge for scratch free installs.

Bubble Popper Air Release Pen

Bubble Popper air replease pen for use with all vinyl films.

Isopropyl Alcohol

A multi-use cleaning agent for cleaning printheads or as final wipe prior to digital-printing on rigid substrates. Available in 70% or 99%.

RollePro Wrap Tool

Roll vinyl over rivets and contoured surfaces, such as door handles and side moldings in seconds with RollePro.

Speed Wing Squeegee

The Speed Wing is designed with "wings" to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.

Monding & Trim Removal Tools

The kit includes five distinctive tools for the easy removal of body fasteners, interior trim pieces, exterior body moldings, wheel hub caps, etc. Made from heavy-duty plastic to prevent scratching and damage to vehicle surfaces.

Felt Block Squeegee

Soft felt block shaped squeegee designed to avoid scratching during vinyl application.

Extreme Magz Magnets

Make applying vinyl and wraps easier with this large 1 5/8" diameter magnet with soft rubber coating that will not harm your graphics or substrates.

Polyspray 2 Spray Bottle

1.25 litre pressurized spray bottle, handy for large surfaces and long-duration sprays

PPF & Window Tint Install Tools

Tools specifically chosen for their use during 3M PPF and Window Tint installations.

Heat Guns

Heat guns for vinyl application

Original Yellow Wrap Gloves

The Original Yellow Wrap Glove for wrap vinyl installation is specifically constructed to optimize the applicators efforts, from preventing oil transfer to the surface, reduced scratches, anti static properties reducing the attraction of airborne dust.

Auto Tint & Vinyl Squeegees & Tools

A collection of popular squeegees, blades and handles designed for window tint application.

Clear Self Healing Cutting Mat

A clear, flexible, self-healing cutting mat that is 3/16" thick and made of clear PVC. It will not curl or lift once rolled out. Ideal for use on flatbed application tables that are illuminated or placed over top of measuring grids on your work table.

Clean Room Wipes

These 100% polyester, white, lint free wipes are 9"x9" with sealed edges. For use in clean rooms, electronics and medical environments. 150 wipes per pack.

Bubble Popper Air Release Pen

Bubble Popper air replease pen for use with all vinyl films.

Acetone

Ideal for thinning polyester resin, cleaning fiberglass tools, and dissolving two-part epoxies & adhesives before hardening. Useful as heavy-duty degreaser.

Isopropyl Alcohol

A multi-use cleaning agent for cleaning printheads or as final wipe prior to digital-printing on rigid substrates. Available in 70% or 99%.

Lacquer Thinner

Screen wash for lacquer-based screen inks.

Big Blue Safety Ruler

Big Blue Safety Ruler is the one choice for the finishing room. Made of heavy duty aluminum construction with a curved finger guard for maximum protection from knife mis-use or slips.

Xtreme Self-Healing Cutting Mats

Protect your work table surface with these white, semi-translucent, high impact polymer blended cutting mats. Can be combined with optional measuring grids which are placed underneath.

Grommet Machine

Sooper Ace Hand Press Grommet machine is made of cast iron, and is still portable. This hand-operated unit cuts a hole and sets a grommet simultaneously. #2 Die (3/8") is included.

Clean Room Wipes

These 100% polyester, white, lint free wipes are 9"x9" with sealed edges. For use in clean rooms, electronics and medical environments. 150 wipes per pack.

Foamwerks Cutter for Sooper Edge

Foamwerks cut perfect straight edges on any depth of foamboard from 1/8" to 1/2"(3.1mm to 12.7mm).

Telescopic Slider Cutter Tool

A practical, hand-held cutting tool that allows you to cut media across the length of a cutting table, without leaning over the table.

RollePro Wrap Tool

Roll vinyl over rivets and contoured surfaces, such as door handles and side moldings in seconds with RollePro.

Clear Self Healing Cutting Mat

A clear, flexible, self-healing cutting mat that is 3/16" thick and made of clear PVC. It will not curl or lift once rolled out. Ideal for use on flatbed application tables that are illuminated or placed over top of measuring grids on your work table.

Mondo Mobile Rack

Mobile storage rack for up to 16 rolls of media and banner material.

MondoRaxx Jumbo

Heavy Duty aluminum 10-roll wall rack for storing rolls of print media, colour change media, banner rolls, laminates and much more.

Scraperite Holder & Blades

Scraperite yellow razor blade holders work with either orange plastic or blue polycarbonate plastic razor blades. This tool helps to lift and peel away pressure sensitive vinyl, dirt, grime, wax, tar, gum and any other substances, while not damaging surface areas.

Wrap Cut Knife

This knife will cut through only the paper backing of a self-adhesive vinyl. No more risk of damaging your film or adhesive or cutting through the film side of your vinyl while on its backing paper.

Economy Liner Cut Tool

Disposable tool that seperates the liner from the adhesive film in order to cut the liner.

Polyspray 2 Spray Bottle

1.25 litre pressurized spray bottle, handy for large surfaces and long-duration sprays

Window Perf Gap Knife with 2 Blades

This metal handle, twin parallel blade knife allows for cutting strips of paper, stencil or vinyl. It is also ideal for cutting gaps between the window seals and perforated window film for longer life window perf installs.

Telescopic Slider Cutter Tool

A practical, hand-held cutting tool that allows you to cut media across the length of a cutting table, without leaning over the table.

Plastic Utility Knife w/ 9mm Blade

An economy grade, plastic handled utility cutting knife that includes 1, 9mm snap blade. Ideal for film patter cutting and general trimming. Comes in assorted colours.

Economy Liner Cut Tool

Disposable tool that seperates the liner from the adhesive film in order to cut the liner.

Scraperite Holder & Blades

Scraperite yellow razor blade holders work with either orange plastic or blue polycarbonate plastic razor blades. This tool helps to lift and peel away pressure sensitive vinyl, dirt, grime, wax, tar, gum and any other substances, while not damaging surface areas.

Wrap Cut Knife

This knife will cut through only the paper backing of a self-adhesive vinyl. No more risk of damaging your film or adhesive or cutting through the film side of your vinyl while on its backing paper.

NT Heavy Duty Knife

NT L500GRP Heavy Duty is a 18mm, retractable blade knife with ratchet auto-lock slider which locks the blade into place while cutting.

KDS L-22 Gripfit Auto-Lock Knife

KDS L-22 Gripfit is an 18mm, auto-lock, retractable blade knife. It has a bright yellow ergonomic style yellow handle and rubber grip. Offers a locking slider mechanism that can be used with one hand. Can be used with 8pt replacement blade.