201+ Masking Tape

Use this general masking tape for holding, bundling, sealing, non-critical masking applications and a vast number of other jobs where a pressure sensitive tape is needed.

301+ Masking Tape

An industrial strength masking tape for paint masking, holding, bundling and identifying applications.

401+ Masking tape

An industrial stength masking tape to critical paint masking applications where strong holding and high temperatu performance is required.

3M 101+ Masking Tape

101+ is a masking tape intended for indoor light-duty applications. It uses a rubber-based adhesive, tan crepe paper backing and can withstand temperatures up to 175F (79C).

233+ Automotive MaskingTape

233+ green coloured tape has excellent UV resistance, conformability, transfer resistance, and is resistant to bleed through. It hugs curves and contours for easy use, and provides outstanding paint lines and adhesive transfer resistance. For use with water or solvent based paint systems.

203

General purpose masking tape for light-duty bundling, attaching and labelling. Room temp, but lasts 1 hr up to 93C.

2307 Masking Tape

General purpose masking tape for holding, bundling and sealing, and other jobs where pressure-sensitive tape is needed.

2308 Performance Masking Tape

2308 Performance Masking Tape is a general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other jobs where a pressure-sensitive tape is needed.

205 Painters Tape

205 Green Painters Tape is a medium adhesion tape that is ideal for painted walls & trim, woodwork, glass & metal. This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight.

Press In Place Auto Emblem Tape

3M Press-In-Place clear emblem adhesive securely and easily bonds emblems and small pieces of trim to back onto automotive surfaces. Ideal for use in every wrap shop!

467MP

3M 467MP is a 4.2mil, adhesive transfer tape with exceptional environmental resistance and enhanced bond strength. It uses 3.2mils of high performance 200MP pressure sensitive acrylic adhesive on 58 lb polycoated kraft paper liner.

465

2 mil, high-tack acrylic laminating adhesive 400 with 3.5 mil, 60 lb densified kraft paper liner.

950

5 mil 300 high-strength acrylic laminating adhesive on 3.5 mil, 60 lb densified kraft paper liner. High and low surface energy plastic bond. UV and chemical-resistant.

9415PC

2 mil acrylic laminating adhesive 400 and 1000 on a 78 lb polycoated kraft paper liner and polyester film carrier. High and low tack. Medium temperature. Low solvent-resistance.

F9473PC

10 mil 100 MP high-performance acrylic laminating adhesive with 4.2 mil, 58 lb polycoated kraft paper liner. Ideal for bonding metal trim, flexible circuits. Interior and exterior industrial use.

9485PC

350 high-performance acrylic laminating adhesive on 4.2 mil, 62 lb polycoated kraft paper liner. High tack. Temperature and solvent-resistant.

ATG Adhesive Transfer Tape 924

ATG Adhesive Transfer Tape 924 is a 2-mil (0.05 mm), reverse wound, pressure-sensitive adhesive that bonds on contact to a variety of substrate or material combinations.

231 Performance Masking Tape

High-Temperature Masking Tape 213 is a very high-temperature resistant tape for use in masking and holding applications

468MP

3M Adhesive Transfer Tape 468MP has a 200MP acrylic adhesive with 4.2 mil, 58 lb polycoated kraft liner for a 5mil total thickness. Easy to die-cut and process with excellent moisture and solvent resistance, high temperature resistance and shear strength.

6035PC

6035PC is a 5.0 mil, 300MP high strength pressure sensitive laminating adhesive with 4.2 mil mil 58 lb polycoated kraft paper liner. Good for bonding high and low surface energy plastics, textured plastics, foams, fabrics, and coated papers.

Banner Ups, PowerTabs and PowerTape

With Banner Ups, banner finishing is easy. Simply print your banner, then peel and press to apply Banner Ups, or PowerTape to your banners.

Banner Hemming Tape

Banner hemming tape that is a clear, 7.5mil thick with a 1/2 mil PET carrier coating on both sides with a very aggressive acrylic adhesive.

9416 Low Tack/High Tack for LSE

9416 is 1.5 mil, double-coated tissue with acrylic adhesive 400 on one side and repositionable adhesive 1000 on the other. Supported by a tissue carrier on a 70 lb polycoated kraft paper liner. 9416 has a low tack adhesive on the back side (exterior of roll) and a high tack (permanent) adhesive on the face side (interior of roll).

9425 Permanent / Removable

3M 9425 is a double coated tape with a permanent acrylic adhesive 420 on one side, and a removable and repositionable medium tack adhesive 1050 on the other side of a 58# polycoated paper liner with a PVC carrier.

9500PC

9500PC is a clear, 5 mil (0.14 mm) double coated tape with high performance 350 acrylic adheisve. It has a 1.0 mil, clear PET carrier film for dimensional stability and ease of die cutting. With high-holding strength and short-term heat resistance up to 350°F (177°C), it adheres well to powder coated surfaces, most plastics and difficult surfaces..

9088-200 DC High Tack

7.9mil, clear, high performance double coated high tack tape with a high performance adhesive 375. Good up to 450F short-term exposure.

9690

5.6 mil 300 MP high-tack acrylic adhesive, double-coated with polyester carrier on 6.2 mil, 83 lb polycoated kraft paper liner.

9741

6.5 mil double coated hand-tearable polyester film carrier with acrylic adhesive.

93020LE High Strength Tape

3M 93020LE double coated tape has a 0.5mil clear polyester carrier coated with 7.4mils of 3M 300LSE adhseive. This 7.9mil total combintion provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene, plastics and powder coated surfaces.

4611 VHB

4611 is a 5mil, grey, firm double sided closed cell acrylic foam tape with a red PE liner. This tape has excellent temperature resistance and can be used to bond metal parts prior to paint processing. Max temp: 232C

4910 VHB Clear for Acrylic & Glass

4910 is a 40 mil, crystal clear, closed-cell acrylic VHB tape with red PE film liner and permanent acrylic adhesive. Used for joining clear or light coloured materials and can be used to replace rivets, screws or fasteners.

4930

4930 is a 25 mil, thick, white, closed-cell acrylic foam carrier with printed paper liner and acrylic adhesive. High strength, convenient handling, damp- and impact-resistant.

4941

4941 is a 45mil, grey, conformable, double-sided closed-cell acrylic VHB foam tape with paper liner. Bonds to a broad range of high and medium surface energy substrates including metals, glass, and a wide variety of plastics.

4945

4945 is a 45mil, white acrylic VHB foam tape with a multi-purpose acrylic adhesive on a kraft paper liner. Bonds vinyl trim and prepainted signs onto trucks and trailers.

4950 Foam Tape

4950 is a 45 mil, white closed-cell acrylic foam VHB tape featuring an all-purpose acrylic adhesive. Good for high surface energy substrates.

4951 Foam Tape

4951 is a 45mil, double-sided, closed-cell VHB acrylic foam tape with PET film liner for low temperature installations. The high tack acrylic adhesive can make a reliable bond at 32F (0C). Bond panels to aluminum building frames and truck trailer frames.

4959

4959 is a 120mil thick, firm, white, double-sided VHB closed-cell acrylic foam tape. Bonds well to high surface energy substrates. Provides handling convenience, cushioning, damping, and impact resistance.

5952 for Powder Coat

5952 is a 45mil, highly conformable, black, double-sided closed-cell acrylic VHB foam tape. For tough to stick to surfaces such as powder coated paint and plastics. Bonds well to high and medium surface energy substrates.

CV45F Commercial Vehicle Tape

Commercial Vehicle Tape CV45F bonds to a wide variety of high and medium surface energy substrates and is plasticizer resistant.

RP16 & RP45 Double Sided VHB Tapes

RP16 and RP45F VHB are your go-to conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tapes for bonding and mounting to a wide variety of substrates.

4932 Double Sided Acrylic Foam Tape

3M VHB Double Coated Acrylic Foam Tape 4932 is 25.0 mil thick and utilizes a low surface energy adhesive on a firm foam.

4905 VHB Clear for Acrylic & Glass

3M VHB Tape 4905 is a clear, 20 mil (0.5 mm) tape with general purpose acrylic adhesive. 4905 is in the 4910 family of VHB Tapes and is commonly used in applications to join transparent material or where clear or colourless tape is preferred. It is specifically designed for good adhesion to metal, glass, and plastics such as polycarbonate, and acrylic.

LSE VHB Tapes for Plastics

LSE VHB tape series is a white, conformable, double-coated acrylic foam tape with a high initial tack and soft foam, on a siliconized polyethylene film liner. For LSE surfaces such as polypropylene (PP), thermoplastic elastomers (TPE) and thermoplastic olefins (TPO) and stainless steel.

4026

4026 is a 62mil thick, natural coloured, double-coated, open-cell urethane foam tape with a paper liner. It is durable on interior mounting applications with a high shear strength.

4032

4032 is a 1/32" thick double coated urethane foam tape which is conformable and offers high shear strength.

4462

4462 is 1/32" black double coated polyethylene foam tape. Quick stick adhesive is ideal for bonds to a variety of surfaces for light duty applications for industrial and electronic use.

4492W / 4492B

3M 4492 is a 0.031in (0.8mm), white or black, double coated closed cell polyethylene foam tape on a tan paper liner. It is conformable with quick stick acrylic adhesive that bonds well to irregular surfaces. Bonds to a variety of surfaces for light duty applications.

4466

4466 is a 62mil light duty, double-coated white polyethylene foam tape, that is conformable, with rubber adhesive for variety of surfaces.

4658F

3M 4658F Removable Foam Tape is a clear, double coated acrylic foam tape that removes cleanly from many surfaces. Ideal for mounting signs, air fresheners, nameplates or dispensers.

3M Command Refill / Picture Hanging

Command Strips make decorating quick and easy. They are a damage free, nail free way to perfectly hang schedules, posters, calendars and pictures without frames, or as an alternative to double-sided tape. They hold strongly to wood, tile, metal and painted surfaces, yet remove cleanly - leaving behind no holes, marks, sticky residue or stains.

SJ-3560 Dual Lock

Clear acrylic adhesive on back of clear polypropylene re-closable fastener. 250 stems per sq. inch.

SJ-4570 Dual Lock Low Profile

SJ-4570 Dual Lock low profile re-closable fastener with low-surface energy adhesive on back of clear polypropylene. High strength, waterproof and UV resistant adhesive backing. Good for indoor and outdoor use.

SJ3526N Hook & Loop

3M Fastener Hook & Loop SJ3526N is a general purpose PSA backed nylon hook with rubber adhesive and white polypropylene film liner.

Silver Duct Tape

2929 and 3939 Duct tapes are composed of waterproof polyethylene film over cloth scrim backing with a rubber adhesive for demanding applications.

369 Box Sealing Tape

Tartan Box Sealing Tape 369 is a clear polypropylene box sealing tape with a rubber adhesive. This tape offers a strong backing and an aggressive adhesive that provides a secure and durable closure.

3M Stamark Removable Marking Tape

Stamark Temporary Removable Pavement Marking Tape is a retroreflective concrete and asphalt marking tape used to delineate traffic lanes and help drivers safely navigate work zones in dry conditions.

Jessup Safety Track Floor Tape

Jessup Safety Track is a coloured, grit containing, commercial grade non-skid marking tape. It is the preferred product when visual warnings are required to mark potential slip and fall hazard areas.

7953MP

Membrane Switch Spacer is a 1.5 mil, 200 MP high-performance acrylic adhesive double-coated on each side of 0.5 mil polyester film carrier.

7957MP

Membrane Switch Spacer is a 2 mil, 200 MP high-performance acrylic adhesive double-coated on each side of 3 mil polyester film carrier.

7961MP

Membrane Switch Spacer is a 2 mil, 200 MP high-performance acrylic adhesive double-coated on each side of 7 mil polyester film carrier.

Scotch-Weld EPX Plus II Applicator

Applicator for use with 1:1 50mL, 2:1 37mL and 3:2 43mL cartridges. A separate plunger can be ordered for the 10:1 37mL cartridge.

Scotch-Weld Epoxy Adhesive DP125

3M Scotch-Weld Epoxy Adhesive DP125 is a flexible, grey, two-part epoxy. 1:1 mix ratio, 25 minute work life and handling strength in 2.5 hours. Dispensed with a 3M Scotch-Weld EPX Plus II applicator.

DP810 / DP812 Structural Adhesive

3M Structural adhesives offered in DP810, DP810NS and DP812 versions are applicable for sign applications that require bonding, gluing, adhering, joining, attaching, assembling, encapsulating, potting and sealing.

Structural Adhesive DP100 Clear

DP100 Plus Clear is a fast setting, two-part, 1:1 mix ration mercaptan-cured structural epoxy adhesive. It is unique among fast setting mercaptan cure epoxies in that it combines high shear strength with good peel performance properties.

Structural Epoxy Adhesive DP105

DP105 is a very flexible, two-part structural epoxy adhesive that gives you the strength you need, cures clear, and remains nearly colourless even when cured in larger masses. It works on a variety of substrates including metals, ceramics, glass, wood and many plastics.

Scotch-Weld Metal Bond Adhesive

DP8407NS is a non-sag structural adhesive with high overlap shear and peel strength, as well as good impact resistance and durability.

Structural Adhesive DP8805NS/8810NS

Non-sag, toughened two-part acrylic adhesive for many plastics, metals and glass applications.

Scotch-Weld Acrylic Adhesive DP8405

Toughened, non-sag, two part MMA based adhesives.

465

2 mil, high-tack acrylic laminating adhesive 400 with 3.5 mil, 60 lb densified kraft paper liner.

950

5 mil 300 high-strength acrylic laminating adhesive on 3.5 mil, 60 lb densified kraft paper liner. High and low surface energy plastic bond. UV and chemical-resistant.

9415PC

2 mil acrylic laminating adhesive 400 and 1000 on a 78 lb polycoated kraft paper liner and polyester film carrier. High and low tack. Medium temperature. Low solvent-resistance.

9485PC

350 high-performance acrylic laminating adhesive on 4.2 mil, 62 lb polycoated kraft paper liner. High tack. Temperature and solvent-resistant.

F9473PC

10 mil 100 MP high-performance acrylic laminating adhesive with 4.2 mil, 58 lb polycoated kraft paper liner. Ideal for bonding metal trim, flexible circuits. Interior and exterior industrial use.

9471

2 mil, high-strength acrylic adhesive on 3.5 mil, 60 lb densified kraft paper liner. Bonds to both high and low surface energy surfaces.

9472

5 mil, high-strength acrylic adhesive on 3.5 mil, 60 lb densified kraft paper liner. Bonds to both high and low surface energy surfaces.

9502

2 mil 220 industrial acrylic adhesive with 4.2 mil, 58 lb polycoated kraft liner. For bonding membrane switches. Good die-cut.

9505

A thin 5.0 mil adhesive and a durable PCK liner, with 3M Adhesive 220, which is formulated for good initial adhesion to metal and HSE (high surface energy) plastics. The thicker adhesive helps improve wet-out and adhesion on textured surfaces.

7952MP Double Linered

2 mil, 200 MP High Performance Acrylic Adhesive with Double Liner of 4.2 mil.

8132LE Double Linered

A 2 mil, 300 LSE high-strength acrylic adhesive double-lined with 4.2 mil, 58 lb polycoated kraft liner.

9471LE

2 mil, 300 LSE low surface energy acrylic adhesive on a 4.2 mil, 58 lb polycoated kraft paper liner.

9472LE

5 mil, 300 LSE Low Surface Energy Acrylic Adhesive on a 4.2 mil 58 lb Polycoated Kraft Paper Liner.

9667MP

2.0 mil (0.05 mm) 200MP high performance acrylic adhesive on 6.5 mil 86 lb. polycoated kraft liner. Offers a heavy lay-flat liner for improved graphic attachment, die cutting and joining of smooth surfaces.

9671LE

2 mil, high-strength 300 LSE adhesive with 6.5 mil, 83 lb polycoated kraft paper liner. High and low surface energy plastics.

7955MP Double Linered

3M 7955 MP is a 5 mil 200MP high performance acrylic adhesive on double liner of 4.2 mil 58 lb polycoated kraft paper. General industrial joining, industry standard, excellent die-cut and process capabilities. Use for selective die-cutting. Double linered version of 3M Adhesive Transfer Tape 468MP.

Optically Clear Mounting Adhesive

A 1.0 mil, optically clear, permanent one side, removable the other side mounting adhesive.

MultiTac Hi-Tack Mounting Adhesive

MultiTac is a white or clear, permanent/permanent, high tack mounting adhesive for difficult substrates.

Facemount Optically Clear Mount

A 1mil optically clear. permanent/permanent, pressure-sensitive mounting adhesive for clear substrates.

WindowTac Mounting Adhesive

WindowTac is a visually clear, 1mil, PET film, with a permanent adhesive on one side and an air egress removable adhesive on the other.

TwinTac Mounting Adhesive

TwinTac is a double-linered, 2 mil, plasticised, clear PVC mounting adheisve coated on both sides with a pressure sensitive, aqueous acrylic adhesive which is protected on both sides by a bleached Kraft grey grid release paper coated on one side with siliconised polyethylene.

OptiTac Mounting Adhesive

A 1.5mil PET, optically clear mounting adhesive available in permanent/removable or permanent/permanent. It offers excellent UV stability to graphic prints.

OptiTac Carrier Free Mount Adhesive

OptiTac CF is a 1.75 mil, unsupported pressure sensitive, permanent solvent acrylic adhesive, protected by a clear PET release liner on both sides.

ReTac Duo Perm/Ultra Rem Mount

ReTac Duo is a 1 mil clear PET flm, coated on both sides with 1mil of adhesive on each side for a total thickness of 3mil. It has a permanent adhesive on one side to be used on graphic prints and ReTac ultra removable adhesive on the other, allowing it to be easily removed and re-positioned for repeated use.

77 Multipurpose Spray Adhesive

Super 77 Multipurpose Spray Adhesive is an extremely versatile, fast-drying, and transparent spray adhesive that bonds a wide range of lightweight materials.

90 Spray Contact Adhesive

Fast, high-strength, sprayable contact adhesive for wood- and metal-work. Fast tack-bond to variety of substrates like concrete, wood, metal.

Scotchweld 4693

4693 is a high performance adhesive that forms strong bonds on most plastics, polypropylene (PP), polyethylene (PE) and polyolefin blends (TPO). It bonds well to other plastics, such as ABS, PMMA and nylons, polyesters, rigid polystyrene and resists weathering, water and cleaning products.

550 Adhesive Sealant

3M 550 Polyurethane (grey, white or black) adhesive sealants are formulated to have a wide variety of hardness, open times, and performance parameters to meet many application needs.

730 Low-VOC Adhesive Sealant

730 low VOC adhesive sealants are formulated to have a wide variety of hardness, open times, and performance parameters to meet many application needs.

760 UV Bonding Adhesive Sealant

A white, Low-VOC hybrid sealant that is a single-component silane modified polymer (SMP), moisture-curing, elastomeric, isocyanate-free adhesive sealant that offers exceptional UV resistance and long term durability. Perrmanently elastic and is capable of bonding dissimilar materials, offering long-lasting bonds and design flexibility. Paintable when wet with a 10-30 minute skin time.

5200 Marine Grade Adhesive Sealant

Fast-curing marine polyurethane adhesive sealant, which becomes tack-free in one hour, and fully cures in approximately 24 hours.

4905 VHB Clear for Acrylic & Glass

3M VHB Tape 4905 is a clear, 20 mil (0.5 mm) tape with general purpose acrylic adhesive. 4905 is in the 4910 family of VHB Tapes and is commonly used in applications to join transparent material or where clear or colourless tape is preferred. It is specifically designed for good adhesion to metal, glass, and plastics such as polycarbonate, and acrylic.