3M Air Release Tools

Puncture Film to remove entrapped air bubbles. Air release tool 391x and 392x replacement points.

Vinyl Applicators (Squeegees)

Gold Nylon, Blue Plastic, White DI-NOC and CPA-1 Power Grip squeegees for vinyl or premask application.

3M Textured Surface Applicators

Designed for use with 3M films for Textured Surfaces, these applicator tools allow you to apply to brick, concrete, stucco and other rought surfaces to give vinyl a painted-on look.

3M Trim Masking Tape

3M Trim Masking Tape is designed to lift and protect trim moldings during masking, eliminating overspray and visible paint edges.

Perfect-It Detail Cloth

This ultra-soft, non-scratching, lint-free microfibre cleaning cloth quickly and completely removes oily or film residues including waxes, polishes, glazes and fingerprints.

ASLAN C-Pen Liquid Chalk Marker

ASLAN C-pen is a white liquid chalk pen for writing on all types of blackboards and blackboard films.

Avery Application Squeegees

Vinyl application squeegees are applicable for every type of installation: White Hard Card Plastic, Blue Felt Edge, Red Pro Flex Felt Edge, FleXtreme Mico Squeegees and Pro Rigid.

Supreme Wrap Vinyl Surface Cleaners

The Supreme Wrap Care range includes a Cleaner, Power Cleaner and Sealant. These are professional grade products that are simple for anyone to use. They help matte, satin and gloss vehicle wraps cope with the challenges of the road after leaving the workshop.

Avery Application Wrap Gloves

Avery's specially designed, completely seamless, grey cotton glove is for easy and precise application of self adhesive wrap material. This wrap glove has built in anti-static properties and provides good friction resistance during application.

Kraft Paper

A 50#, inexpensive, one-time use backer for single sided lamination on roller laminators.

Drytac Magnetic Tape Strips

Drytac Magnetic Tape A & B are two different magnetic tapes of opposite polarity, each coated with a permanent pressure-sensitive adhesive on one side.

BannerBug Retractable Banner Stands

World-renowned BannerBug retractable banner stands are made in Australia and offer a lifetime limited guarantee! Single or double-sided banner stands come in a variety of sizes from 8 11/16" to 114" widths.

DRS Dust Removal Roller/Pads

The Dust Removal System (DRS) Roller removes dust and dirt from prints, substrates or film without leaving a tacky residue.

Zippy Cutter

The blade on this safety knife is fully enclosed by a moulded plastic handle to protect fingers and silicone rollers.

On-A-Roll Lifter Universal

On-A-Roll Media Lifter (Universal) allows single users to maneuver heavy print and laminate media rolls onto the lifter and then directly onto the printer feeder. Adjustable roll wedges and a removable roll ramp permit use with most printers and flatbed roll-to-roll cutters.

Roller Tray for Vinyl Rolls

A 20" metal roller tray designed to allow the rolling out of any width material up to one hundred fifty (150) lbs. The two metal rollers are placed 2" apart so the user can unroll or re-roll flexible material without any effort.

Luco 95 Brushes

Hand-lettering brushes that are brass wire bound, brown Kazan quill attached to blue handles. Very soft brushes for lettering on glass and other smooth surfaces. Available in graduated sizes.

Digital Media Swatchbook

2017 Digital Media Swatchbook, containing swatches of ND Graphics' full line of digitally printable products.

Shop & Equipment Cleaning Supplies

Foam-tipped swab sticks, lint-free clean room wipes, spray bottles and other cleaning supplies for your shop and equipment

Vinyl Storage Racks

Vinyl media storage racks allow for properly storage of both digital and vinyl cut vinyl materials by the core to avoid damaging the edges and roll faces.

Olfa AK-4 Knife Handle & Blades

Olfa AK-4 cushion handle, high performance knife and KB4-S replacement blades.

Olfa 180 Knife and Blades

Olfa series 180, 9mm size knives and replacement blades are ideal for lightweight cutting of paper and film.

Olfa "A" Knife and Blades

Stainless construction with the exception of the handle which is yellow plastic. Multi-purpose knife, ideal for cutting paper, film and plastic.

Olfa 18mm L2 Replacement Blades

LB-10B, 18mm replacement blades fit the L2 heavy-duty utility cutter with rubber grip. Long lasting, durable snap-off blade - a new sharp edge with each snap. 10 blades per pack.

Olfa SVR-2 Knife and Blades

SVR-2 is an ideal 9mm utility knife. The auto-lock mechanism allows for quick changes to the cutting depth with just one hand. Full stainless steel body is perfect for use in moist environments where rust is a concern.

Bubble Popper Air Release Pen

Bubble Popper air replease pen for use with all vinyl films.

Acetone

Ideal for thinning polyester resin, cleaning fiberglass tools, and dissolving two-part epoxies & adhesives before hardening. Useful as heavy-duty degreaser.

Isopropyl Alcohol

A multi-use cleaning agent for cleaning printheads or as final wipe prior to digital-printing on rigid substrates. Available in 70% or 99%.

Lacquer Thinner

Screen wash for lacquer-based screen inks.

Big Blue Safety Ruler

Big Blue Safety Ruler is the one choice for the finishing room. Made of heavy duty aluminum construction with a curved finger guard for maximum protection from knife mis-use or slips.

Xtreme Self-Healing Cutting Mats

Protect your work table surface with these white, semi-translucent, high impact polymer blended cutting mats. Can be combined with optional measuring grids which are placed underneath.

Grommet Machine

Made of cast iron but still portable. This hand-operated unit cuts a hole and sets a grommet simultaneously. Easy to use with a heavy solid handle for the leverage you need to punch through the thickest banner material. The base is bored so you can mount it to a table or use it as a portable unit. These will also work on Coroplast, Tyvek, Celtic posterboard, Styrene, and many other materials.

Clean Room Wipes

These 100% polyester, white, lint free wipes are 9"x9" with sealed edges. For use in clean rooms, electronics and medical environments. 150 wipes per pack.

Self Piercing Grommet

No need to pre cut holes for setting grommets. Lay the grommet onto the bench press, lay the material on top with a grommet washer and press down the handle. Ideal for quality control and production

Foamwerks Cutter for Sooper Edge

Foamwerks cut perfect straight edges on any depth of foamboard from 1/8" to 1/2"(3.1mm to 12.7mm).

Telescopic Slider Cutter Tool

A practical, hand-held cutting tool that allows you to cut media across the length of a cutting table, without leaning over the table.

RollePro Wrap Tool

Roll vinyl over rivets and contoured surfaces, such as door handles and side moldings in seconds with RollePro.

Self Healing Cutting Mat 3/16"

A clear, flexible, self-healing cutting mat that is 3/16" thick and made of clear PVC. It will not curl or lift once rolled out. Ideal for use on flatbed application tables that are illuminated or placed over top of measuring grids on your work table.

Mondo Mobile Rack

Mobile storage rack for up to 16 rolls of media and banner material.

MondoRaxx Jumbo

Heavy Duty aluminum 10-roll wall rack for storing rolls of print media, colour change media, banner rolls, laminates and much more.

Wrap Cut Knife

This knife will cut through only the paper backing of a self-adhesive vinyl. No more risk of damaging your film or adhesive or cutting through the film side of your vinyl while on its backing paper.

Economy Liner Cut Tool

Disposable tool that seperates the liner from the adhesive film in order to cut the liner.

Polyspray 2 Spray Bottle

1.25 litre pressurized spray bottle, handy for large surfaces and long-duration sprays

Dolly Max

The Dolly Max comes with four 56" long steel tube posts. It has a capacity of 700 lbs. With extra casters the capacity is increased to 1000 lbs. It is ideally suited for the warehouse, job sites, shop or convention centres.

Panel Cart

Perfect for easily moving sheets of wood, plastic, glass, granite and sheet rock. Rubber grippers inside the brace mechanism keep your material from being marred.

Sooper Edge Safety Ruler

The Purple Sooper Edge Ruler is the premier safety ruler in the sign and graphic industry. Made of heavy duty aluminum construction with an inserted stainless steel edge to eliminate cutting into the ruler. It also has a curved finger guard for maximum protection from knife mis-use or slips.

Sooper Clips

Sooper clips easily secure your wound media rolls for storage. The simple to use clips have a finger hole for quick slide on and off. 50-pack has 25 each of large and small clips.

Sooper Edge T-Square

Sooper Edge T-Square attachment is made of heavy duty aluminum. This attachment makes perfect 90 degree angle. Designed to fit all Sooper Edge and The Big Blue Safety Rulers from 18"to 96".

Spike Laser Measurement Device

Spike is the world's first laser smartphone measurement estimation solution. The Spike device, Spike mobile app, and your Smartphone work together to change the way measurements are taken and shared.

Stabilo Pencils

Stabilo all-surface water-soluble marking pencils mark clearly on glass, acetate, plastic, metal, photos and film, as well as paper. Water-soluble markings wipe off smooth surfaces with a damp cloth and erase from paper with a standard eraser. Also wipes off with water when used on chalk-board PSA films.

8914 Edge Sealing Tape

2 mil cast, optically clear vinyl film with a optically clear pressure-sensitive adhesive.

Rivet Brush

Graphics are easier to install over rivets using this traditional applicator tool. Available with a wide grip handle.

3M Air Release Tools

Puncture Film to remove entrapped air bubbles. Air release tool 391x and 392x replacement points.

Vinyl Applicators (Squeegees)

Gold Nylon, Blue Plastic, White DI-NOC and CPA-1 Power Grip squeegees for vinyl or premask application.

3M Textured Surface Applicators

Designed for use with 3M films for Textured Surfaces, these applicator tools allow you to apply to brick, concrete, stucco and other rought surfaces to give vinyl a painted-on look.

94 Tape Primer

Promotes Adhesion of 3M Films to Surfaces (Plastics/Paints). Recommended when Conforming Film to Deep Channels

Perfect-It Detail Cloth

This ultra-soft, non-scratching, lint-free microfibre cleaning cloth quickly and completely removes oily or film residues including waxes, polishes, glazes and fingerprints.

Wall Test Kit

3M Wall Test Kit is a valuable tool for determining what film to use on your customer's walls. With the Wall Test Kit you are able to make this determination in as little as 15 to 20 minutes.

3M Stripe Off Wheel

Designed for high-speed removal of vinyl, decals, graphics and double sided moulding striping and trim.

3M Roller Applicators

VCAT2, Roller L and Roller S are custom designed rollers to apply pressure to vinyl to flat surfaces and vehicle channels.

3M Citrus Base Adhesive Remover

3M Citrus Based Adhesive Remover is an easy to use aerosol spray can that is ideal for the removal of adhesive residue or for surface preparation prior to use of an adhesive.

3M Citrus Base Cleaner

3M Citrus Base Cleaner is a non-corrosive aerosol cleaner used to help dissolve and remove dirt, grease, tar, and many non-curing adhesives. It cleans without streaking and has a fresh citrus scent.

3M Edge Sealer

Seal Exposed Edges Of Compatible Films, Prevent Lifting Due To Environmental Exposure Or Cleaning

3M General Purpose Adhesive Cleaner

8987 is a General Purpose Adhesive Cleaner in an easy to use aerosol spray format. It quickly cleans off wax, grease, oil, old adhesive, road tar, silicone, etc.

3M Stripe & Adhesive Remover

Used for removing vinyl and vinyl stripes from acrylic enamel surfaces, adhesive removers cleans off adhesive residue.

3M Power Grip CMP-1

A large foam pad on a wooden handle makes it easy to conform heated film around rivets. The larger handle grip is designed for comfort.

3M Adhesion Promoter 111

3M Adhesion Promotor 111 is an isopropyl alcohol based solution used to promote better and faster adhesion of 3M VHB Tapes to various surfaces including bare metals, galvanized steel, and painted surfaces. Since surfaces and paint formulations very considerably, each application should be verified through testing.

PPF Installation Gel

3M Paint Protection Film Installation Gel is formulated to ease the application process of Paint Protection Film (PPF) and ensure a quality application.

Knifeless Tapes

Finish-Line, Perf-Line & Bridge-Line Tapes are very conformable film backed vinyl film trimming tapes that achieve a clean vinyl trim cut on highly contoured surfaces.

ASLAN Wood Squeegee

ASLAN FB1 (15cm wide) and FB2 (26cm wide) are stable wooden board squeegees with a felt edge for film application.

Avery Air Release Tool

Avery Dennison Air Release Tool Z1074 is a sharp, retractable needle in a handy metal pen style design. It is used to help release trapped air and eliminate bubbles during vinyl application.

Avery Application Squeegees

Vinyl application squeegees are applicable for every type of installation: White Hard Card Plastic, Blue Felt Edge, Red Pro Flex Felt Edge, FleXtreme Mico Squeegees and Pro Rigid.

Supreme Wrap Vinyl Surface Cleaners

The Supreme Wrap Care range includes a Cleaner, Power Cleaner and Sealant. These are professional grade products that are simple for anyone to use. They help matte, satin and gloss vehicle wraps cope with the challenges of the road after leaving the workshop.

Avery Application Wrap Gloves

Avery's specially designed, completely seamless, grey cotton glove is for easy and precise application of self adhesive wrap material. This wrap glove has built in anti-static properties and provides good friction resistance during application.

Avery Tool Belt

Avery branded, heavy duty black tool belt, with several pockets and adjustable nylon belts. Fits all Avery install tools sold separately.

Avery Super Strong Magnets

Super Strong magnets are used by vehicle wrappers when preparing and alligning graphics to vehicle. These strong magnets have handles on top to make movement easier and eliminate the use of masking tape. Set of 2.

Gerber Weeding Tweezers

Gerber Weeding Tweezers are metal, fine point Boley style tweezers perfect for weeding vinyl graphics or any detail work. Measures 4-3/4" in long. Polished tips are ground to match.

MBX Vinyl Zapper

MBX Vinyl Zapper removes vinyl, decals, pinstripes, reflective tape and adhesives quickly and easily in a single operation. Performing on metal, glass, wood and fiberglass, the Vinyl Zapper strips vinyl without damaging paint or harming the underling surface.

Wet Edge Squeegee

Hard card squeegee with a special wet edge for scratch free installs.

Bubble Popper Air Release Pen

Bubble Popper air replease pen for use with all vinyl films.

Isopropyl Alcohol

A multi-use cleaning agent for cleaning printheads or as final wipe prior to digital-printing on rigid substrates. Available in 70% or 99%.

RollePro Wrap Tool

Roll vinyl over rivets and contoured surfaces, such as door handles and side moldings in seconds with RollePro.

Felt Block Squeegee

Soft felt block shaped squeegee designed to avoid scratching during vinyl application.

Extreme Magz Magnets

Make applying vinyl and wraps easier with this large 1 5/8" diameter magnet with soft rubber coating that will not harm your graphics or substrates.

Polyspray 2 Spray Bottle

1.25 litre pressurized spray bottle, handy for large surfaces and long-duration sprays

PPF & Window Tint Install Tools

Tools specifically chosen for their use during 3M PPF and Window Tint installations.

Heat Guns

Heat guns for vinyl application

Wrap Gloves

Yellow, lint free application wrap gloves that reduce dirt transfer and friction when hand cutting vinyl.

Auto Tint Install Squeegees & Tools

A collection of popular squeegees, blades and handles designed for window tint application.

Rapid Prep

Safe and super effective "deep cleaning" water base solvent, works in one minute to lift silicone, wax, polymer, grease, nicotine, etc. from the surface.

Rapid Remover

Rapid Remover is a non-toxic, adhesive remover that breaks down and removes adhesives in as little as sixty seconds!

Rapid Tac

Rapid Tac Application Fluid provides more control over applications than ever before. it also cleans substrates without leaving residue, ensuring a contaminant free installation.

Rapid Tac II

Rapid Tac II Application Fluid is for fast, easy, installation of graphics. It works with a wide variety of films such as the calendered, intermediate, high performance calendered, metallic, reflective, polyester, mylar and other specialty films. Applicable for installation temperatures from -6C to +60C.

Rapid Clear

Rapid Clear is the perfect end to a job well done and will make your work look it's best. Easily clean and polish plexiglass, glass, and most polycarbonates, while leaving a lustre that is sure to impress.

Avery Breakaway Knives

Avery Breakaway Knives are a sign shop necessity. Available in both plastic and metal handles these utility knifes can be used for many applications

Avery Snitty Vinyl Cutter

Safe, easy to use hand-held plastic media slitter to quickly slice through pressure sensitive vinyl, paper and more. Can be used by either right or left handed users

Zippy Cutter

The blade on this safety knife is fully enclosed by a moulded plastic handle to protect fingers and silicone rollers.

SteelTraK Supplies

Blades and Supplies for Keencut Steeltrak

Excalibur 3S Economical Vertical

Excalibur 3S Economical Vertical Cutter designed for tight budgets, the Excalibur 3S vertical cutter is economically priced and provides most of the cutting capabilities of the SteelTraK.

Hot Knife Cutter for Textile

Foster HSGMs HSG-0 is a 120V, 60W hand-held heat knife ideal for accurately cutting and sealing the edges of synthetic fabrics that could flex, unravel or fray.

Plast-Kut Knife

With a flick of the wrist, users will have professional looking results without the inconvenience of measuring tape, straight edges, markers and X-Acto knives. Plast-Kut is a real time saver and your finished cuts will look much cleaner and straighter.

Olfa AK-4 Knife Handle & Blades

Olfa AK-4 cushion handle, high performance knife and KB4-S replacement blades.

Olfa "A" Knife and Blades

Stainless construction with the exception of the handle which is yellow plastic. Multi-purpose knife, ideal for cutting paper, film and plastic.

Olfa 180 Knife and Blades

Olfa series 180, 9mm size knives and replacement blades are ideal for lightweight cutting of paper and film.

Olfa 18mm L2 Replacement Blades

LB-10B, 18mm replacement blades fit the L2 heavy-duty utility cutter with rubber grip. Long lasting, durable snap-off blade - a new sharp edge with each snap. 10 blades per pack.

Olfa SVR-2 Knife and Blades

SVR-2 is an ideal 9mm utility knife. The auto-lock mechanism allows for quick changes to the cutting depth with just one hand. Full stainless steel body is perfect for use in moist environments where rust is a concern.

Window Perf Gap Knife with 2 Blades

This metal handle, twin parallel blade knife allows for cutting strips of paper, stencil or vinyl. It is also ideal for cutting gaps between the window seals and perforated window film for longer life window perf installs.

Telescopic Slider Cutter Tool

A practical, hand-held cutting tool that allows you to cut media across the length of a cutting table, without leaning over the table.

Economy Liner Cut Tool

Disposable tool that seperates the liner from the adhesive film in order to cut the liner.

Scraperite Holder & Blades

Scraperite yellow razor blade holders work with either orange plastic or blue polycarbonate plastic razor blades. This tool helps to lift and peel away pressure sensitive vinyl, dirt, grime, wax, tar, gum and any other substances, while not damaging surface areas.

Wrap Cut Knife

This knife will cut through only the paper backing of a self-adhesive vinyl. No more risk of damaging your film or adhesive or cutting through the film side of your vinyl while on its backing paper.

NT Heavy Duty Knife

NT L500GRP Heavy Duty is a 18mm, retractable blade knife with ratchet auto-lock slider which locks the blade into place while cutting.

KDS L-22 Gripfit Auto-Lock Knife

KDS L-22 Gripfit is an 18mm, auto-lock, retractable blade knife. It has a bright yellow ergonomic style yellow handle and rubber grip. Offers a locking slider mechanism that can be used with one hand. Can be used with 8pt replacement blade.

Coro-Claw

Coro-claw is for cutting and scoring corrugated plastic sheets, this model has an improved blade and handle design and uses replacable cutting heads.

X-acto 3201 Knife

X-acto #1 is a 4 7/8" aluminum handle with a No. 11 blade for delicate precision cutting of lightweight materials like paper, plastic, thin metal, film and acetate.

X-Acto Blades

The original X-ACTO knife has been praised for more than 50 years as the standard for precision. Attaining this level of precision, accuracy and reliability starts with supreme quality craftsmanship. X-ACTO knife blades are crafted with sharpened carbon steel for a reliable cut and a strong blade, ensuring exact precise cuts.

Foster All-A-Board Lifter

The All-A-Board Lifter reduces the risk of injury to your operators and damage to valuable rigid substrates. One operator can easily transport and lift up to 500 lbs.

Core Holder for Epson GS6000

Core Holder for Epson GS6000

Kongsberg Blades

Blades for Kongsberg plotters.

SteelTraK Supplies

Blades and Supplies for Keencut Steeltrak

Evolution 2 Blades & Supplies

Excalibur Supplies

Blades and Supplies for Foster Excalibur

Sabre General Purpose Cutter

Blades and Supplies for Keencut Sabre General Purpose Cutter

Anagraph Blades

Excel-5, Excel-2, Excel EM

Gerber Blades

Supersharp Knife Blade, Swivel Blade, Swivel Knife Assembly, 45 Degree Rubber Cutting Blade, 60 Degree Knife Blade

Graphtec Blades

45 & 60 Degree FC Series

Mimaki Blades

37 / 40 / 56 Degree CG Series, New Star & DGI Omega

Mutoh Blades

45 Degree SC-Series

Carbide Plotter Replacement Blades

EC-1300 Carbide Plotter Blade Series are 45 and 60 degree econo-blade line of plotter blades .A substitute for Roland PRC 145-0 blades.

loline Blades

The Econo-Blade line of plotter blades is a lower cost alternative. Substitute for Ioline PN 103233. This blade is recommended for cutting material thicknesses of 4-12 mil with an offset of .0165.

CAT/Solara UV Printer Supplies

Cleaning and Maintenance Supplies for Gerber UV Printers.

Sabre Router Supplies

Collets and Coolant Trim mist supplies

Ulano Stripping Tool

The Ulano Stripping Tool comes with a soft metal flat head and a needle point. These are interchangeable and adjustable in length.

New Gold Aluminum & Wood

High-quality carbide bits ideal for Aluminum Composites, Hardwood, Softwood, Non-Ferrous Metals (Aluminum, Brass, Copper)

New Gold Folding Tool

These high performance bits can be used with all Gerber routers and engravers, as well as with other routers, both automated and manual. Made from high-quality sub-micrograin carbide, these bits are fashioned using a unique geometry. This reduces the need to change tools when routing a variety of materials requiring the same tool diameter.

Gerber Pens

Plotter pens and pen assemblies

ADA Compliance

Bits for ADA-complant signs. Shank diameter of 6.0mm/1/4". Long and Short Types use different engraver options.

Traditional Gold 3 Flute Spiral

Gerber Gold routing bits are designed for greater performance and longer tool life. These remarkable routing bits are made from the highest quality micrograin carbide to the tightest tolerances in the industry. They are then coated with titanium nitride to enhance their durability even further. The result is superior edge quality and lower tooling cost.

3D Carving

V-cutting carbide bits give superb cut quality, longest tool life, accuracy. For small, intricate graphics.

Engraving

Long, short engraving bits that work w/Gerber and other routers/engravers. Ideal for acrylic, polycarbonate and other plastics.

New Gold 3D Modeling

Gerber Gold routing bits are designed for greater performance and longer tool life. These remarkable routing bits are made from the highest quality micrograin carbide to the tightest tolerances in the industry. They are then coated with titanium nitride to enhance their durability even further. The result is superior edge quality and lower tooling cost.

Table Surfacing Bits

Used to mill the sacrificial table surface perfectly flat in respect to the Z axis and aid in precise depth control when cutting.

Traditional Gold 2 Flute Spiral

Gold 2 Flute Spiral Router Bit.

New Gold All Purpose Straight

Gerber takes the guesswork out of choosing the correct bit. The application code is etched into the shank of the bit, along with the part number for easy identification. All purpose Straight bit cuts substrates with thin laminates, foam boards, clay coated paper & styrene surfaces

New Gold Foams (Special Long)

Gerber offers high quality, long and short type industry standard engraving bits. These bits are top-loading engraving spindles.

New Gold Hard Plastic & Foam

New Gerber Gold bits take the guesswork out of chosing the correct bit for a specific substrate by grouping them by application. The application is coded and etched into the shank of the bit, along with the part number for easy identification once the bit has been removed from it's sleeve.

New Gold Platinum

These high performance bits can be used with all Gerber routers and engravers, as well as with other routers, both automated and manual. Made from high-quality sub-micrograin carbide, these bits are fashioned using a unique geometry. This reduces the need to change tools when routing a variety of materials requiring the same tool diameter.

GS, HS, Sprint Supplies

An Assortment of Supplies for Gerber Plotters.

New Gold Soft Plastic & Foam

New Gerber Gold bits take the guesswork out of chosing the correct bit for a specific substrate by grouping them by application. The application is coded and etched into the shank of the bit, along with the part number for easy identification once the bit has been removed from it's sleeve.

Embosstrack Supplies

Knife holders and Blades for EmbossTrack plotters.

Traditional Gold Single Flute Radia

These bits are ideal for cutting sheet aluminum and brass with a thickness of 1.5mm and less, as well as soft woods and soft alloy aluminum. Unlike the spiral flute bits, these bits have a single straight edge which doesn't pull up on the work piece. This straight flute allows the bit to "shear" the cip off at the top edge of the material being cut without leaving a burr.

Fastrack Supplies

The cutting strip is the plastic strip directly under the where the blade cuts the media.

EnVision Supplies

Blades and Pens for EnVision plotters

Double Sided Router Tape

Holds material in place while routering

Activated Carbon Refill

Carbon refill for the Greenflow Duster

HP 70 Printheads

Replacement printheads for DesignJet printers.

HP 72 Printheads

Replacement Printheads for HP DesignJet printers.

HP 771 Printheads

Replacement printheads for HP DesignJet printers.

JF Equipment Supplies

Cleaning Swab Sticks and Cleaning Kits for use with Mimaki JF UV printers

Mimaki Supplies

Blades for Mimaki CG Plotters

Shop & Equipment Cleaning Supplies

Foam-tipped swab sticks, lint-free clean room wipes, spray bottles and other cleaning supplies for your shop and equipment

Cleantex Hydrosorb Wipes

Cleantex Hydrosorb Wipes are 4"x4" non-woven, hydro-entangled construction with excellent bidirectional strength. They are designed for general-purpose wet and dry wiping where economy and cleanliness are of critical importance. Highly absorbent, they are compatible with most solvents and can be used to clean precision components. Packed 1200 per bag.

Equipment Supplies W54S/S64S

Supplies for use with OKI W54S and W64S printers.

Equipment Supplies 74S/104S

Equipment Supplies for use on Seiko H74S and H104S printers.

Equipment Supplies E64S

Equipment Supplies for use with the OKI E-64S printer.

Self Healing Cutting Mat 3/16"

A clear, flexible, self-healing cutting mat that is 3/16" thick and made of clear PVC. It will not curl or lift once rolled out. Ideal for use on flatbed application tables that are illuminated or placed over top of measuring grids on your work table.

Clean Room Wipes

These 100% polyester, white, lint free wipes are 9"x9" with sealed edges. For use in clean rooms, electronics and medical environments. 150 wipes per pack.

Activated Carbon

Carbon used in conjunction with the Captivair fume extraction system.

Coro-Claw

Coro-claw is for cutting and scoring corrugated plastic sheets, this model has an improved blade and handle design and uses replacable cutting heads.

SawTrax Supplies

Supplies for use with SawTrax Equipment

Summa Cutting Strip

Replacement Cutting Strips and Platen Protection Strips for Summa Plotters.

Summa Empty Ribbon Cassette

Summa F-Series Creasing Tool

F-Series Creasing Tool allows you to crease your desired media to produce various options of prototype boxes and more.

Summa Manual Slitter Razor Blade

Knife / Blade

Summa Optiprint Adhesive Roll

Optiprint Adhesive Roll

Summa F-Series Blades

Various size blades available for Summa F-Series

Summa Blades

An Assortment of Blades for Summa Plotters.

Summa Plotter Pens

Summa plotter pens are available in either Fiber Tip or Ballpoint Tip.

Mega Collection

5000+ images from the best sign and vehicle graphic artists in the world. Along with the CD of .ai and .eps files, a 276 page catalogue, spiral bound with durable laminated covers is included.

Art Station Templates

Templates offer accuracy, quality, consistency. Save as AI CSI or EPS files, can be imported into any vector or cutting program.

Xtreme Mega Collection

Xtreme Graphic Kits are a complete solution for outputting hi-resolution print and cut vehicle graphics.

The Works - 7 Collections

Includes 1600 Backgrounds & Fills, Vehicle Wraps, Murals, 170 Large Format Digital Images with transparent backgrounds, and 800 Print & Cut Vehicle Graphics.

Xtreme Wrap Master

Approx 850 tiles and full side wraps. 2 DVDs w/ref catalogue. Files in HQ .JPEGS, transparent files in .TIFF.

Kalitec Deko Post & Panel

Kalitec Deko is a modular, 3-part outdoor signage system comprised of aluminium pre-cut sign blanks combined with a customized post and three anchor options -- permanent ground, temporary ground and deko-bloc to suit every application.

ASB 7" - 11"

7" - 11" Wide Aluminum sign blanks, available in a variety of gauges

ASB 4" - 6"

4" - 6" Wide Aluminum sign blanks, available in a variety of gauges

ASB 12"

12" Wide Aluminum sign blanks, available in a variety of gauges

ASB 13" - 17"

13" - 17" Wide Aluminum sign blanks, available in a variety of gauges

ASB 18"

18" Wide Aluminum sign blanks, available in a variety of gauges

ASB 19" - 23"

19" - 23" Wide Aluminum sign blanks, available in a variety of gauges

ASB 24"

24" Wide Aluminum sign blanks, available in a variety of gauges

ASB 25" - 35"

25" - 35" Wide Aluminum sign blanks, available in a variety of gauges

ASB 36"

36" Wide Aluminum sign blanks, available in a variety of gauges

ASB 37" +

+37" Wide Aluminum sign blanks, available in a variety of gauges

French Language Signs

Pre printed French language aluminum signs

No Parking Signs

Pre printed "No Parking" aluminum signs

Private Property Signs

Pre printed "Private Property" aluminum signs

Reserved Parking Signs

Pre printed "Reserved Parking" aluminum signs

Stop Signs

Pre printed "Stop" aluminum signs