1-888-634-7274 | Live Chat  
Welcome,  [ Sign In     Register ] | Français
EasyWeed Stretch

EasyWeed Stretch Cuttable Heat Transfer Material

At 85 Microns or 3.5mils thick, this is the thinnest, softest and most flexible Siser heat transfer vinyl material available. It applies at a lower temperature, can be hot or cold peeled with no lifting and offers durability wash after wash. It is super stretchy so it is compatible with many materials containing elastic, Lycra or Elastine. It has a matte finish and a pressure sensitive carrier and the thinness of the material makes it a one-step application that is perfect when applying multiple layers.

Application instructions are: Temperature: 320F / 160C, Press Time: 20 seconds, Pressure: Firm. Recommended application accessories include a Siser Weeder pick, multi-purpose Paper or a heat transfer cover sheet.

    Specifications

  • Construction PU Composition, pressure sensitive backing
  • Finish Matte finish
 

Select your colours to see product list  

Please note: Due to variations in monitor colours, these swatches are not an exact match to the actual product. For exact colour match, refer to your colour chart.
To request a colour chart click here

WHITE
01
GRAY
22
SILVER
13
CHARCOAL
80
BLACK
02
NAVY BLUE
04
COBALT BLUE
31
ROYAL BLUE
03
CELESTIAL BLUE
32
TOTALLY TEAL
60
PALE BLUE
61
ORANGE
08
SUN
28
YELLOW
06
LEMON
21
RED
05
BRIGHT RED
55
GOLD
12
WISTERIA
37
LILAC
62
BALLERINA PINK
91
ROSE GOLD
44
CORAL
87
BRIGHT ORCHID
63
BUBBLEGUM
79
PASSION PINK
86
PURPLE BERRY
90
ROYAL PURPLE
15
SEA GLASS
88
FROSTY MINT
83
PINE GREEN
24
SWEET MINT
89
GREEN
08
COFFEE
11
CHESTNUT
92
BURGUNDY
14
Applicable for application onto:
  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Lycra/Spandex

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean
    • Application instructions (home iron)
    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with firm pressure (do not slide iron)
    • Press each section of design for 20 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
    • Peel carrier hot or cold

      Application Instructions (heat press):
    • Cut in reverse
    • Weed excess material
    • Preheat garment for 2-3 seconds
    • Apply design at 320F/160C
    • Use firm pressure for 20 seconds
    • Peel carrier hot or cold

    Related Products