1-888-634-7274 | Live Chat  
Welcome,  [ Sign In     Register ] | Français

MetaScape Frost Etch Film, Dry Apply Window Film

MetaScape Frost Eatch Air Egress printable window film offers a monomeric, calendared, semi-transparent film with an opal sheen that allows 85% light transmission. Once applied, the printed areas produce higher visual impact than a print on gloss clear film, while unprinted areas retain the appearance of frosted glass. It offers excellent opportunities for office partitions, retail and leisure applications. Compatible with eco-solvent, solvent, latex and UV-cure printers.

**PLEASE NOTE: Due to the METAScape air-egress technology, this product is recommended as dry-apply only. Installation will fail if wet applied. For long term installations, edge sealing is recommended.


  • Adhesive Permanent, pressure sensitive acrylic
  • Finish Frost, dusted look
  • Durability 3 years in vertical exposure under Northern European conditions
JMEB2012 30" x 5 yd sample   5YD YES
JMEB2013 48" x 11 yards   RL YES
JMEB2011 48" x 54 yards   55Y -
JMEB2011-YD 48" , sold in multiples of 5 yards   YD YES
JMEB2017 63" x 11 yards   RL YES
JMEB2016 63" x 54 yards   55Y YES

Metamark's ICC colour profiles help achieve accurate colour reproduction and the highest print quality: Metamark ICC Colour Profiles

  • Once applied the printed areas produce higher visual impact than a print on gloss film
  • Compatible with eco-solvent, solvent, latex and UV-cure printers
  • Fire Rating: Class B - classification compliant with BS EN 13501-1:2007

    Material Handling:
  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing
  • Do not handle the face film directly and ensure it free from dust and static

    Printing Guidelines:
  • Suitable for use on solvent, eco-solvent, latex and UV-cure printers.
  • The product may be printed in the correct orientation or reversed, showing the image through the glass
  • Ensure that the correct profiles and heater settings are used.
  • For print and cut applications it is advisable to allow a border around the print.

  • Dry-apply only!
  • Allow the inks to cure before cutting flush to the print or application, this is usually 24-48 hours
  • Ensure the glass is clean from grease and dirt. Do not use silicon based cleaning products
  • Office partitions
  • Retail Windows
  • Leisure applications
  • Retail windows
  • Doors
  • Corporate identity - interior markings
  • Privacy screening
  • Under glass counters, reception desks and tables
  • Retail signage and POP
  • Restaurants and pubs
  • Can also be used for cut letter and applied to glass using the Protective Packaging Air Mask Transfer Tape - APPA97448

Related Products